Payment & Shipping Terms:
|Usage Strength:||Testing Machine||Aplication:||Plastic|
|Warranty:||12 Months||Impact Energy:||300J、150J|
|Impact Speed:||5.2m/s||Power:||Three Phase-four Wire 50Hz、380V、180W（main Motor）|
|Outside Dimension:||820×600×1400mm||Jaw Round:||R1—1.5mm|
fallindart impact test equipment,
plastic testing equipment
380V Irregular Surface Plastic Testing Machine / Durability Semi Automatic Impact Testing Machine
KJ - 300 - b type impact tester is used to measure metal materials in dynamic load resistance under the impact of performance to determine materials in dynamic load of the property.
This machine according to the national standard GB/T3808-2002 "pendulum impact tester, development and production, according to GB/T229-1994" metal charpy notch impact test method "on the metal material impact test, the biggest impact energy for 300 j, and comes with a 150 j pendulum, the sample section for 10 x 10 mm; Testing machine has a greater impact energy, so the main for test impact toughness large black metal, such as steel and alloy.
This tester use pendulum impact energy before and after the impact of the residual energy only difference between scale display way, get sample absorption work; Operation for the semi-automatic control machine, simple operation, high working efficiency, and after the thrust sample using the surplus energy is automatically set up and ready for the next impact test, so in the continuous do impact test laboratory and a lot to do impact test of metallurgy, machinery factory and other departments more can reflect its advantages.
If you want to enlarge the machine function, according to ASTM electronics - 81 "metal material notch test impact test method of impact test, can also be customized special to comply with this standard pendulum (300 j, 150 j and support a pair of)
|Scale scale range and division value||
Energy range: 0—300J 0—150J
Every small grid division value: 2J 1J
|Pendulum force value (impact constant)||
|Pendulum preliminary Yang Angle||150°|
|Pendulum shaft center of rotation to impact point (sample center) distance||750mm|
|Sample support span||40mm|
|Impact blade round||R2—2.5mm|
|Power supply||three phase-four wire 50Hz,380V,180W(main motor)|
Why choose us?
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2.Excellent after sale service:
1 YEAR warranty. If you have any problems during testing process, we promise we will give you a reply with 24 hours and solution provide within 3 working days. What you need to do is to send us the controller.
Covered with air bubble film before put the machine into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
Contact Person: Sophia Cai