Product Details:
Payment & Shipping Terms:
|
Usage Strength: | Testing Machine | Operation: | Manual+Automatic |
---|---|---|---|
Warranty: | 12 Months | Aplication: | Rubber |
Power: | 220V ± 10% 50HZ | Standard: | GB3398.1-08, GB3398.2-08, ISO2039 1:20-01, ISO2039 |
Data Output: | Printer | Timing Range: | 10-90S |
Highlight: | rubber testing instruments,universal test equipment |
Manual Automatic Full Load Melt Flow Index Measurement With 220V ± 10% 50HZ 1 Year Warranty
Introduction:
Plastic ball indentation hardness tester is in refers to the regulation of the diameter of the steel ball, under the influence of load test, vertical pressure into the surface of the sample and keep a certain time on unit area of indentation on the average pressure tester.
Developed by our company plastic ball indentation hardness tester, using automatic acquisition methods such as loading, choice of timing, deformation, and eliminated the widespread adoption of digital display mode, and adopts touch screen display. In this way, the operator after the boot can be according to the characters on the LCD screen prompts for test operation, great convenience to the user. Plastic ball indentation hardness instrument parameters conform to GB3398.1-08, GB3398.2-08, ISO2039 1:20-01, ISO2039 - "01 and relevant provisions of the standard.
Can achieve a plastic ball indentation hardness and plastic Rockwell hardness of two kinds of test method test.
Operating principle:
According to the standard requirements, in the frame, loading device, indentation depth indicating device, timing device and pressure head (regulation of the diameter of the steel ball are embedded) of institutions, by loading device in a given test load down head vertical pressure into the surface of the sample, keep a certain time of the average pressure on unit area of indentation. KGF/was or N/was said.
The ball indentation hardness value press type calculation:
0.21P
H=------------------------
25πD(h-0.04)
In the formula::H - ball indentation hardness,kgf/mm2 and N/ mm2
P——Test load,kgf or N;
D——Steel ball diameter,mm;
h——After correction frame deformation of indentation depth,mm.
Annotation:h=h1-h2;
h1——Under the test load pressure depth,mm;
h2——Equipment under test load frame deformation,mm
The main configuration and accessories:
One set host
Host head(Ф6.35mm;Ф5mm;Ф12.7mm;Ф10mm;Ф3.175mm)
A mini printer and one manual
Specification:
Model | KJ-3097 |
Initial load |
ball indentation:9.8N RH:98.07N |
Test load |
ball indentation:49N,132N,358N,961N RH:588.4N,980.7N |
Pressure head diameter |
ball indentation:Ф5mm,Ф10mm RH:Ф3.175mm,Ф6.35mm,Ф12.7mm |
Sample height | 4mm |
Indicates a minimum degree value indentation depth | 0.001mm |
Timing range | 10-90S |
Timing accuracy | ±1% |
Value accuracy | ±2% |
The host deformation | ≤0.04mm |
Pictures:
Contact Person: Miss. Silivia Zhang
Tel: 86-13925519875
Fax: 86-0769-28638013
0.5~500mm/min 40*40*70cm High-low Temperature Tensile Chamber With ISO,CE Certifications
Double Column Electronic Universal Tensile Tester Floor Type For Elongation
Packaging Material Universal Tensile Tester Designed For Sealing Elongation
20Ton 750mm Universal Material Tester , UTM Hydraulic Tensile Strength Equipment
1 Roller 2kg Electronic Astm Tape Adhesion Test FINAT Standard
KEJIAN Tape Adhesion Tester Ball Rolling Ball Tack Test Machine
ASTM D2979 Peel Force Test Equipment , 0-100N 90 Degree Peel Test Machine
10 Weights SS Connect Plates 1KG Lab Testing Machine / Adhesive Tape Retentivity Tester
Environment Test Chambers Aging Test Chamber Plastic plate UV aging tester
270L Salt Spray Tester Machine Transparent Pvc Rigid Plastic Board 220v 50HZ
Hot Air Cycling Drying Temperature Humidity Test Chamber Economical Customized