A220V 50Hz Environmental Test Chambers , Digital Rain Water Resistant IP Rating Spray Tester

Electronic AC 220V 50Hz 1KW Digital Rain Water Resistance IP Rating Waterproofing Spray Tester Equipment

1. Uses of rain box tester

This product is suitable for electric products assessment, shell and seal in the rain environment can ensure that equipment and components good performance test. This product uses scientific design, makes the equipment can realistic simulation drop of water, water spray, splash water, water spray, etc., various kinds of environment. Into the comprehensive control system and the adoption of the frequency conversion technology, which makes the rainfall test product frame rotation Angle, jet pendulum rod swing Angle of water quantity and the oscillating frequency can be automatic control.

2. Based on the standard of rain box tester

IEC60529-2001, GB4208-2008, GB2423.23, GB5170.38, GBl0485-93, IPX4, IPX3 equivalent JIS standard, DIN, MZl, etc

3. Features of rain box tester

(1) Glass door with wiper

(2) Pneumatic drive of swivel tube

(3) Adjustable swivel angle

(4) Replaceable swivel tubes

(5) Nozzle fittings can be swiveled and replaced

(6) Adjustable water volume flow and measuring Control of test duration

(7) Control System

(8) Adjust pressure with flow meter.

(9) Adopts imported frequency converter to control rotate speed in order to ensure the test can be conducted as per the applied standards.

(10) A water filter is equipped.

4. Main technical parameters of rain box tester

1.Meet the requirement of IEC60529 standard IPX3 water pouring test and IPX4 water splash test. 2.The test sample will be put or installed on the center of the half-round sinuous pipe and make the bottom of the test samples and the oscillating axis in a horizontal position. During test, the sample would spin around the center line. 3.Swing pipe standard configuration: R600mm and R1000mm two types.Swing pipe inner diameter: Φ15mm. 4.DrillΦ0.4 holes and make the water spray to the center.The water pressure of the device entrance is equal to 10m water level, spraying water pressure is 80-100kpa. 5.Water spraying pipe swing angle: 120º,180º,360º, Vertical sides: 60º,90º,175º. Complete a swing(2*120º) time is 4S;Complete a swing(2*360º) time is 12S. 6.Manual default the test parameters, complete testing automatically shut off the water supply and pendulum pipe angle automatic zeroing and automatic eliminate seeper, avoid scale blockage needle tip. 7.Use Mitsubishi PLC, LCD panel test procedure control box, stainless steel curved pipe, alloy aluminum frame, stainless steel shell.

8.Servo drive mechanism, guarantee the pendulum pipe Angle of precision, the overall pendulum tube structure for hang a wall.

9. Water is recyclable for the chamber type, it is suitable for the small and light specimen; if you specimen is large and heavy, you can consider our separate type.

10. Our water proof test machines can meet test standard of IEC60529(IPX1,IPX2,IPX3,IPX4,IPX5,IPX6,IPX7,IPX8), JIS D0203 water proof test and other equivalent test standard.

Pictures: