|
Product Details:
Payment & Shipping Terms:
|
| Usage Strength: | Test Chamber | Warranty: | 12 Months |
|---|---|---|---|
| Aplication: | Temperature Humidity | Rack Rotating Speed: | 3r/min |
| Average Lamp Life: | 1000 Hours/1500 Hours | DI Water Container: | 5000mL |
| Floor Space: | 1050×3000mm | Power: | AC220V±5% 50Hz 9000W |
| Weight: | 400kg | Outer Chamber Material: | Stainless Steel |
| Inner Chamber Material: | SUS 304 # Stainless Steel, Anti-rust, Easy To Clean | Humidity Range: | 55%-90% |
| Chamber Temperature: | 40±3℃ | Temperature Uniformity: | ≤3℃ |
| Water Pressure At Nozzle: | 1 - 1.5 Bar | ||
| High Light: | constant temperature and humidity machine,temperature humidity controlled cabinets |
||
Electronic Xenon Arc Lamp Tester Rubber Aging Testing Machine with SUS304 stainless steel Materials
Equipment summary:
This xenon lamp rubber aging testing machine is a comprehensive climate testing machine, can do climatic aging test and the lightfastness test of polymer materials which exposed at simulated sunlight. It simulates the light, temperature, rainfall, condensing, humidity to test the materials; it can be used for choosing new materials, improving existing materials, or assessment of change in material composition;
Applicable industries of the climatic chamber:
This xenon lamp rubber aging testing machine applied to control the product quality, such as electronic, plastic products, electrical appliances, instruments, food, vehicles, metals, chemicals, building materials, aerospace, medical care ... and so on.
Techincal parameterof the climatic chamber:
| Model | ZME-2011 xenon lamp rubber aging testing machine | |
| Testing room D×W×H | 500*600*500mm | |
| index | Temperature range | RT+10°C~80°C |
| Humidity range | 65% to 98%R·H | |
| Spray time | 1 to 9999min, abjustable | |
| Spray cycle | 1-240min, interval adjustable | |
| spectral wavelength | 290nm to 800nm (550w/m2) | |
| light source | Full spectrum xenon lamp (air-cooled) | |
| Xenon lamp power | 2.5 kw (longevity: 1600H) | |
|
Control system |
Time controller | Import controller from Moeller |
| Accourate range | Temperature: ±0.1 degree / humidity: ±0.1R·H | |
| Sensor | Platinum resistance Pt 100Ω/mv | |
| Heating system | Independent system, nickel chromium alloy electric heating type heater | |
| Humidity system | stainless steel, external Isolated humidifier | |
| Blackboard temperature | Bimetal thermometer blackboard 55~75 degree | |
| Water supply | Humidification water supply with automatic control, xenon lamp cooled by water recycling | |
| Temperature controller | Import controller | |
| humidity | Irradiation: 30%~65%RH darkly: up to 90%RH | |
| Cycle system | low-noise air-conditioning-type motors, multi-leaf-type centrifugal wind wheel | |
| material | Outside material | Advanced spray color plate /SUS304 stainless steel |
| Inside material | SUS304 stainless steel | |
| Sample holder material | SUS304 stainless steel | |
| insulation | High and low temperature aging of silicone rubber | |
| standard | a set of radiation-proof glass window, dynamic testing sample shelf 1, xenon lamp tube 2 | |
| protector | Leakage, short circuit, over-temperature, water shortages, motor overheating, over-current protection. | |
| Power | AC380V±10% 50±0.5HZ , Three-phase five-wire system | |
| Environmental temperature | ±5+30 ≤85%R·H | |
Contact Person: Sophia Cai
Tel: +8613929477992
Temperature Testing Equipment Humidity Testing Chamber With Panasonic AC Servo Motor
Korea TEMI880 Auto Fabric CRE Extension Universal Tensile Testing Machine with 0.5~500mm/min Speed
0.5~500mm/min 40*40*70cm High-low Temperature Tensile Chamber With ISO,CE Certifications
Mechanical Equipments Universal Testing Machines With Panasonic Ac Servo Motor
90×25×70cm Size Peel Adhesion Test Equipment Viscosity Testing Equipment with 10 Sets Weights
2PH AC220V Motor Type Rolling Wheel Peel Adhesion Test Equipment For Preparing Sample
500N, 1KN, 2KN Optional Stainless Steel Tensile Testing Instrument With 0.5～500mm/min Speed
1PH, AC220V, 50/60Hz Shearing Force Testing Equipment With 200KG,500KG Optional Capacity
3-5 Minutes 220v, 50/60Hz Ink Mixing Machine With Adjustable Distributing Time 250w
2LB Friction Pressure Ink Rub Tester For Labels / Folding Cartons 50 *100mm With ASTM D5264
220V 50Hz 120W Printing Coating Testing Machines With Micrometer Control with Weight 26KG
20/30/40/45m/min Printing Coating Testing Machines Printing Ink Injector Accurately Control Color
