Payment & Shipping Terms:
|Maximum Load Of Basket:||800kg||Lift Mode:||Electric, Load-bearing >900kg|
6v 4.5ah 800kg Car Battery Testing Machine / Battery Seawater Soaking Tester with One Year Warranty
This machine is used to make seawater soak test for battery,soaking in normal temperature seawater(3.5%NaCl).The depth of seawater in channel need to soak battery pack. Battery pack or system with no electrolyte leakage, no fire, no explosion for qualified.
1. Soak the pool material: SUS # 304 corrosion-resistant stainless steel all over the welding, the thickness of 3.0mm, solid structure and salt water corrosion resistance is very good;
2. Battery placed flat Material: SUS # 304 corrosion-resistant stainless steel;
3. Drainage: the outlet is lower than the bottom of the tank connected with the external drainage pipe, so that more thorough drainage, drainage time should less than or equal to 30min, easy to operate the drain opening;
4. Sink: driven by the motor with the screw and linear guide to achieve the electric lift function, while the device can move around the bracket around, after the completion of the test by lifting the body down the battery to solve the inconvenience of manual handling;
5. Battery pack sample lift device:
A. Lifting device load: 900kg
B. Lifting device control can be operated through the field control handle or console, you can also use the remote computer, proximity touch screen for lifting,
C. Lifting device for the basket structure, the use of corrosion-resistant stainless steel hanging tape, the end of the harness with corrosion-resistant steel repair rings do not, rings easy to replace, diameter 10mm, 12mm, 14mm, 16mm each 8, the other end adjustable length Can be flexible to adjust the battery pack in a horizontal state;
D. Large basket with forklift jack, after the basket down to facilitate the sample by forklift.
E. Small basket: the basket material is made of stainless steel with corrosion resistance, the cavity size is W600 * D600 * 100mm, the bottom gap ≤ 100 * 100mm, bearing ≥ 50kg
6. Equipment with time setting function, soaking time can be achieved automatically after drainage;
7. With real-time salt concentration tester, visual display of brine concentration, accuracy is higher than 0.5%;
8. With a brine mixing system, in the detection of brine concentration is higher or lower than the set value can be automatically drained or salt;
9. Water way: with manual / automatic water and lack of water alarm function;
10. Control: short-range PLC touch screen and computer remote control mode two;
|Design Standards||GB/T 31467.3-2015|
|Maximum load of basket||800kg|
|Maximum size of tank lumen||W(3500±100)*D(2500±100)*H(1200±100)mm|
|Size of big basket||W(3100±100)*D(2000±100)*H(100±100)mm|
|Size of small basket||W600*D600*H100mm,bottom gap≤100*100mm,load-bearing≥50kg|
|Lift mode||Electric, load-bearing≧900kg|
|Time setting||0～9999h/m/s adjustable|
|Testing sample||single battery, battery pack|
The upper part of the basket is equipped with at least two high-intensity lighting lamps, illuminating the entire test area, to facilitate observation of the bottom of the pool
The top of the basket is equipped with a high-definition adjustable focal length camera can clearly see the box full sample machine the bottom of the box. Camera pixels in more than 800 million, you can remote control to adjust the shooting angle and shooting distance.
3.Other protective devices
a.low water level, automatically cut off the power, safety warning light device dynamic display / buzzer alarm;
b.reagent (saline) water level is low, the safety warning light device dynamic display;
c.leakage protection, to prevent leakage or short circuit caused by personal injury and equipment failure;
d.emergency stop switch: equipment switch and emergency stop switch in the cabinet surface, with protective cover, easy to operate.
Installation environment requirements:
1. Ambient temperature: 0 ~ 40 ℃.
2. Ambient humidity: ≤ 90% R.H, non-condensing.
3. Atmospheric pressure: 86 ~ 106kPa.
4. No strong vibration around, no direct sunlight or other direct exposure to heat.
5. Installation of the base surface for the ground, the ground requires a clean flat.
6. Power requirements: AC380V (+15%, -10%) 50Hz ± 2%, three-phase five-wire system, reliable grounding.
6v 4.5ah Electric Car Storage Battery Testing Machine / Battery Seawater Soaking Tester
Why choose us?
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2.Excellent after sale service:
1 YEAR warranty. If you have any problems during testing process, we promise we will give you a reply with 24 hours and solution provide within 3 working days. What you need to do is to send us the controller.
Covered with air bubble film before put the machine into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.