|
Product Details:
Payment & Shipping Terms:
|
| The Length Of The Piston Rod Head: | 6.350+/-0.100mm | Loaded Barrel Length: | 152+/-0.1mm |
|---|---|---|---|
| Temperature Resolution: | 0.1℃ | Timing Range: | 0.1-999 S |
| Measurement: | Quality Act (MFR) | The Diameter Of The Piston Rod Head: | 9.475+/-0.015mm |
| Usage: | Melt Flow Index MFI Tester | Dimensions: | 250*350*510(L*W*H) |
| Temperature Accuracy: | +/-0.2℃ | Timing Accuracy: | 0.1s |
| High Light: | rubber testing equipment,universal test equipment |
||
250*350*510(L*W*H) Size Melt Flow Index Measurement , Electronic Plastic Testing Instrument
Discription:
KJ-3092 melt flow rate testing instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined.
Standard:
GB/T3682-2000,ISO1133-97, ASTM1238
Technical parameter:
| Model | KJ-3092 |
| Barrel parameters | Inner hole 9.55±0.025mm |
| Pistons parameters | Piston head: 9.475±0.015mm |
| Piston length | H=6.35±0.1mm |
| Paramters | Extrusion hole 1=2.095±0.005mm |
| Temperature parameter | With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade |
| Temperature range | 80degree centigrade~400degree centigrade |
| Temperature accuracy | ±0.2 degree centigrade |
| Display resolution | 0.1degree centigrade |
| Maximum comsuption | < 600W |
| Temperature recovery time | less 4 min. |
| Weight parameters are as follows: | |
| Weight accuracy | ±0.5% |
| Basic configuration | A 0.325kg (including binder bar) |
| B 1.2㎏, | |
| C 2.16㎏ | |
| D 3.8㎏ | |
| E 5.0㎏ | |
| F 10kg | |
| G 12.5㎏ | |
| H 21.6kg | |
| Position detection | |
| Loop distance from up and down | 30mm |
| Control precision | ± 0.1mm |
| Test flow control | |
| Times of cutting the material | 0~10 times |
| Material cutting interval | 0~999s(set reference Table 2) |
| Control flow reaches the set temperature without volatility | |
| Barrel temperature time | 15 min. |
| Material be installed | 1 min. |
| Material sample temperature recovery time | 4 min. |
| When binder set | 1min |
Pictures:
Contact Person: Miss. Silivia Zhang
Tel: 86-13925519875
Fax: 86-0769-28638013
0.5~500mm/min 40*40*70cm High-low Temperature Tensile Chamber With ISO,CE Certifications
Double Column Electronic Universal Tensile Tester Floor Type For Elongation
Packaging Material Universal Tensile Tester Designed For Sealing Elongation
20Ton 750mm Universal Material Tester , UTM Hydraulic Tensile Strength Equipment
1 Roller 2kg Electronic Astm Tape Adhesion Test FINAT Standard
KEJIAN Tape Adhesion Tester Ball Rolling Ball Tack Test Machine
ASTM D2979 Peel Force Test Equipment , 0-100N 90 Degree Peel Test Machine
10 Weights SS Connect Plates 1KG Lab Testing Machine / Adhesive Tape Retentivity Tester
Environment Test Chambers Aging Test Chamber Plastic plate UV aging tester
270L Salt Spray Tester Machine Transparent Pvc Rigid Plastic Board 220v 50HZ
Hot Air Cycling Drying Temperature Humidity Test Chamber Economical Customized
